.
.

















VEPRO



Vepro System is the Digicom's innovative solution for the Remote Control and Video Alarm.

A cutting edge solution of security developed by Digicom to offer a new wireless Video Alarm System with EDGE, GPRS or LAN connectivity.
All the Vepro tecnology is mainly based on the concentrator, with Gateway functions, that is able to monitor up to 4 IP cameras (via Wi-Fi or LAN) and up to 20 intelligent sensors (Smart series).
The concentrator is equipped with a Class 10 EDGE/GPRS communication device that allows the remote control of the installation status and to send the alarms to the control center.
The system is composed by Wi-Fi IP cameras (IP Camera 300W), by wireless sensors and by backup systems to guarantee the operation even when power is off. The 433MHz wireless sensors are continuously controlled by the Vepro concentrator that sends scheduled SMS and checks the battery charge. Each sensor is unique of its kind (as in high level alarm systems) and allows an exact identification of the alarm zone.
The latest generation IP cameras can operate day and night as they are equipped with a light sensor and an infrared led. Furthermore they can manage the Duplex function with a double flow of images both in photo format (JPG) and in streaming in MPEG-4 format. The videocamera can be supplied with a battery back-up device to guarantee the operation even when power is off.
Vepro constantly controls the presence of sensors and videocameras and in case of alarm (generated by sensors), it captures the images coming before and after the alarm and sends them immediately to the control center to analyse the event.
Vepro can be used also as a local videosurveillance system together with a specific storage unit equipped with an hard-disk.
In this way all the system can be remote viewed, at any time, through the EDGE connection or via LAN (for example through the ADSL router).
The control center can display on the PC the events causing the alarm or verify the live situation.
If a broadband connection is available (ADSL, UMTS), also the remote listening will be possible through the microphone on the videcamera.

Technical Specifications

VEPRO
- Built-in Class 10 EDGE/GPRS communication device
- Built-in 54 Mbps Wi-Fi module
- Built-in 433 MHz receiver
- 1 input
- 1 output
- Management of I/O input for alarms and activations
- Mailing of Pre & Post alarm images
- Management of MJPEG images
- Images resolution: VGA 640 x 480 pixel max
- Management of up to 4 Wi-Fi IP cameras (54 Mbps)
- Management of up to 20 SMART sensors
- Anti-Tamper
- 10/100 4 ports switch
- Internal rechargeable Back-up Battery
- Built-in sound buzzer

SMART SENSOR
- 433 MHz Wireless sensor
- Wired magnetic REED
- Vertical TILT sensor
- Continuous sensors status check
- Alive message every 30 seconds
- Battery low indication
- Long-Life battery

IP CAMERA 300HD
- Wireless IP Camera
(more info)

IMAGE STORAGE SERVER
- NETR-A01
(more info)


Supplied with

User's manual