.
.
















      		MICHELANGELO SHDSL

      8E4338

      Michelangelo SHDSL is a Bridge/Router with SHDSL technology for connections up to 4.6 Mbps (4 wires connection), or up to 2.3 Mbps (2 wires connection).

      The SHDSL technology, so as the HDSL, carries out symmetric connections, that is the downstream and the upstream speed is the same.
      The typical application of Michelangelo SHDSL is the point-to-point Bridge that allows the connection of two LANs over the leased line or through a VPN via Internet.
      Michelangelo SHDSL uses the traditional twisted pair (metallic continuity is needed).
      In case of Campus applications (inside a private estate) it is not necessary to buy leased lines (CDA), but you can use proprietary lines.
      Michelangelo SHDSL is the ideal solution also for the telecom operators that offer Internet connections with symmetric speed.
      With a simple configuration it is possible to setup Michelangelo SHDSL to be used over 2 and 4 wires connections. Furthermore the connection speed is automatically setup for the maximum performance also in critical connection conditions.
      The data security is guaranteed by a built-in Stateful Packet Inspection Firewall.
      Also the following VPN protocols are supported for a secure connection between one or more sites: PPTP Client/Server, IPSec(*) (IKE, 3DES and AES) and L2TP with IPSec.
      (*) Michelangelo SHDSL hasn't got the VPN hardware acceleration module and doesn't guarantee high performances in the connections with IPSec protocol.

      Technical Specifications

      SHDSL Router
      - ITU-T G.991.2 standard
      - Symmetric speed up to 2.3/4.6 Mbps
      - Autoadaptative connection speed

      ATM and PPP protocols
      - ATM Adaptation Layer Type 5 (AAL5)
      - Multiple protocol over AAL5 (RFC 2684,formerly RFC 1483)
      - Bridged or routed Ethernet encapsulation
      - VC and LLC based multiplexing
      - PPP over Ethernet (PPPoE)
      - PPP over ATM (RFC 2364)
      - Classical IP over ATM (RFC 1577)
      - Mac Encapsulated Routing (RFC 1483 MER)
      - OAM F4/F5

      Protocols and Network functionalities
      - NAT, static routing and RIP 1/2
      - Dynamic Domain Name System (DDNS)
      - Virtual Server and DMZ
      - SNTP, DNS relay and IGMP proxy
      - QoS support

      Firewall
      - Stateful Packet Inspection (SPI)
      - Prevent DoS, Packet filtering, URL blocking

      Virtual Private Network (VPN)
      - Embedded IPSec and PPTP client/server
      - IKE key management
      - DES, 3DES and AES encryption for IPSec
      - MPPE encryption for PPTP
      - L2TP with IPSec
      - L2TP/PPTP/IPSec passthrough

      Management
      - WEB based local and remote configuration
      - WEB based firmware update
      - SNMP v3, MIB-I and MIB-II support
      - DHCP server/client/relay support

      Hardware
      - WAN: SHDSL port
      - LAN: 10/100M 4 ports switch (MDI/MDI-X)
      - Factory default reset button
      - Power jack
      - Power switch
      - Input: 12V DC, 1A
      - Operating temperature: from 0° to 40°C


      Supplied with

      - User's manual