|
| |
| . . |  |
      | 2G LIFT DIALER 8D5778 Remote Alarm System for LIFT Digicom 2G LIFT DIALER is an innovative remote alarm system for LIFT exstremely versatile, easy and quick to install. It can be used both for new installations and for modernizations. The typical installation is in the Frame Controller. In case of out of order conditions or blocks of the lift, the people inside can activate the call to the Service Center by simply pressing the button in the cabin. The alarm call will be immediately generated through the GSM telephone line and at the same time a comfort audio message will be played to inform that an emergency call has been forwarded to the Service Center. 2G Lift Dialer will generate an identification through the DTMF protocol for the correct management by the Service Center. Even thanks to the implementation of ADEMCO protocol (as an alternative to the proprietary one) 2G Lift Dialer can be easily integrated in the software for the management of exhisting calls. Then it is possible to establish a bidirectional audio communication for the alarm management. 2G Lift Dialer manages the periodic call scheduling the frequency according to the needs of the Service Center and it can send calls of technical alarm in case of problems and/or signals (i.e. battery replacement or electrical blackout). EASY INSTALLATION The remote alarm system is composed by the central unit, core of the system (2G Lift Dialer) and by the VoiceBOXes, speakerphone terminals for the communication. The vocal unit VoiceBOX is equipped with speakers, microphone and 2 leds that signal the various phases of the call as required by EN81-28 regulation. The main feature of Digicom’s system is the VoiceBOX management with 2 wires only in autopowered mode. In fact the audio communication, the power supply and the LED and Buttons management is performed through 2 wires only. This feature allow a quick installation and it doesn’t require any other cabling. THE CENTRAL UNIT Its compact size and the removable screw terminal board make the installation easier inside the Frame Controller. Thanks to the filter input and to the input for auxiliary technical alarms the central unit is adaptable to any situation. It is equipped with a relè that can be remote activated via DTMF tones (or via SMS) for the eventual opening of doors and gates. Audio Particular care has been placed in the projecting of the Bidirectional Audio. The GSM audio management is digital to guarantee the best voice performances. Easy Configuration 2G Lift Dialer has been made taking into consideration the installators’needs. This is the reason of the double configuration mode (DTMF tones and SMS). You can configure 2G Lift Dialer through SMS checking the correctness of the configuration or of the phone numbers. Otherwise you can use the classical tone mode (both local and remote). An APP at your service 2G Lift Dialer is one of the first device that can be setup though an android APP together with SMS transmission. Even easier and faster! Ready for the Telemetry of the Frame Controller 2G Lift Dialer has an RS232 serial port to be connected to a Frame Controller. Through the GPRS network (or via CSD) it is possible to reach theFrame Controller and to remote manage it (through the application of the frame controller manufacturer) Remote Upgrade One of the main feature is the possibility to remote upgrade. Technical Specifications GSM/GPRS MODULE - Quad-Band 850/900/1800/1900 MHz - GSM Module: GPRS/GSM Class 10 - GPRS: Multi-slot Class 10 OUTPUT POWER - Class 4 (2W) in GSM at 850/900MHz - Class 1 (1W) in DCS at1900/1800MHz - Plug-in SIM card (1,8V - 3V compliant) INTERFACES - 1 Interface 2 wires for VoiceBOX “BUS” - 1 FXS Interface for Service/Configuration phone - Removable screw terminal board - 1 RS232 serial port (on RJ45) for Frame Controller Telemetry - 1 Guest USB port for local upgrade INPUTS AND OUTPUTS - 1 Filter input - 1 technical alarm input - 1 Relè output (n.c. /n.a) that can be activated by Tones or SMS POWER SUPPLY - Input: at +12 ÷ 24 VDC. / 1A minimum - Li-Ion 3.7V Backup battery (optional) - Max consumption 12W GSM ANTENNA - SMA connector for external antenna - Impedance: 50 ohm OTHER - DIN rail mounting kit included - GSM antenna with 3 meters cable - Size: 115 x 80 x 25 mm - CE Mark and Rohs compliant Note: CONNECTION CABLES For the best performances of the product use 6/10 mm twisted pair (better 9/10 mm) between 2G Lift Dialer and VoiceBOX. |
| Supplied with |
| |
|
| |