|
| |
| . . |  |
       | 2G GSM GATEWAY LIFT PLUS 8D5757 Universal 2G Gateway for Lifts Alarm Systems. EN81-28, EN 81-1, EN 81-2 Test Report issued by licensed laboratory TÜV. 2G GSM Gateway Lift Plus belongs to a new generation of devices especially developed for Lift market. An innovative device fully compatible with the previous generation, based on the same controller and updated according to the market requests. 2G GSM Gateway Lift Plus has one FxS analog port to connect to any lift alarm system. The analog port simulates a PSTN – Telecom Line using the GSM Network instead of the Wired Line with a considerable costs saving. 2G GSM Gateway Lift Plus integrates also an RS232 serial port to connect to the Control Board of the lifts that can manage all the telemetry data. The last generation of Security Alarm Data Centers are able to manage the telemetry information coming from the Lift Control Unit. With these data it is possible to schedule all the preventive maintenance in order to guarantee the total operativity of the lift in any conditions. The serial port is connected on DB9 connector (Tx, RX and GND) so that all data are sent remotely over the GSM network in a CSD data call (up to 9600 bps). DTMF NO Problem! 2G GSM Gateway Lift Plus also implements a sophisticated system to manage the DTMF tone on the GSM Network. This features will allow any centre to report correctly the DTMF Tone sequence avoiding any fails in the DTMF transmission. Technical Specifications GSM • GSM Quad-Band 850/900/1800/1900 MHz • GSM Module: GSM/GPRS Class 10 • Output power: - Class 4 (2W/33dBm maximum nominal value) for GSM at 850/900MHz - Class 1 (1W/30dBm maximum nominal value) for DCS at 1800/1900MHz • Plug-in SIM card (1,8V - 3V compatible) PHONE INTERFACE • FXS Voice Interface • Off-hook AC impedance: 600 ohm • On-hook line voltage: 48VDC • Off-hook line current: 32mA • Dialing type: Tone (DTMF) • Ringing voltage: 38 VAC rms - REN: 3 OTHER INTERFACES • Serial port RS232C (on DB9) • TD, RD, GND Signal • Port Speed from 9600 to 115.200 bps • Format 10 bit (8 data None Parity, 1 Stop) CONNECTION AND COMPATIBILITY • Voice call • Communicators with alarm transmission and periodical test with DTMF • Communicators with alarm transmission and periodical test in digital (with serial port) and analog mode • GPRS ready CONFIGURATION • Device management and configuration via SMS • Phonebook with 4 authorized users for device configuration • Phonebook with 4 authorized users to receive the informative messages from 2G GSM Gateway Lift Plus • Battery Low message with: - 60 minutes autonomy - Shutdown in progress message when backup battery is exhausted • Remote reboot to force a new search for the GSM network • Remote query to know the battery status and GSM signal quality • Automatic reboot every 24 hours POWER SUPPLY • External adapter - Input: 100-240 VAC / 50-60Hz / 0.5A - Output: 12VDC / 1.0A GSM ANTENNA • Quad-Band Omnidirectional Antenna included • SMA Connector • Impedance: 50 ohm BACKUP BATTERY • Standby time: about 6 hours (*) • Talk time: about 1 hour and 30 minutes (*) (*) The battery life depends on several factors, i.e. the charge/discharge time, the operating temperature of the device and the quality of GSM signal OTHER • Dimensions: 115 x 99 x 22,5 mm • Protection IP30 • Operating Temperature: from -20°C to +55°C • CE Mark and Rohs compliant • EN 81-28, EN 81-1, EN 81-2 Test Report issued by licensed laboratory TÜV |
| Supplied with • 2G GSM Gateway Lift Plus (code 8D5757) • Switching power supply (IN: 100-240 Vac / 50-60Hz / 0,5A – OUT 12 Vcc / 1A) (code 8D6065) • GSM Antenna with 3 meters cable (code 8E4432) • Antenna bracket for wall mounting (code 5D1774) • 4pin screw terminal block for power supply (code 2D0889) • 5pin terminal block for FXS Voice interface (code 2D0884) • Phone cable 1,5 meters (code 2D0836) • DIN rail (code 5D1919) • User’s Manual (code 7D1848) |
| |
|
| |